Side stand movement

Tech section strictly for the FJR. Everything from oil changes & suspension setup's to removing sheep hair from hard to reach places on the bike so that your wife never finds out.
Post Reply
User avatar
Spininprop
Veteran
Posts: 494
Joined: Tue Feb 13, 2018 9:05 pm
FJRModel: 2022ES
Traded 2016A
Sold 2013 GSX-R1000
Sold 2003 GSX-R1000
Sold 2000 Bandit 600
Location: South Central, PA
x 689
x 548

Side stand movement

Post by Spininprop »

Up on the center stand, i pull my side stand back and noticed it has a good bit of play pulling and pushing strait out from the bike. I removed the bolt and could not get the bushing out. The bolt and the bushing ID did not appear worn. What appears elongated is the hole in the mount. I was in a hurry and maybe what i think is worn isnt but its definently not the bolt and bushing.

Anyone move their side stand and let me know if theirs does the same? It cant be normal. Maybe 1/2" or a little less at the foot for movement. Replacement mount is $110 new.
IBA# 84110
2022 FJR1300ES
2016 FJR1300A Traded
2013 GSX-R1000 Traded
2003 GSX-R1000 Sold
2000 Bandit 600 Traded
BkerChuck
Veteran
Posts: 1705
Joined: Mon Oct 31, 2016 7:02 am
FJRModel: 2014 FJR1300A
x 2357
x 2796

Re: Side stand movement

Post by BkerChuck »

Walked out and put the '06 I've been riding up on the center stand and checked to see how much travel it has. 1/2" is about what I'm seeing on my coworker's bike that I've been riding. I'll check my '07 when I get home.
ImageImageImage

IBA #50866
User avatar
raYzerman
Contributor
I post more than I ride
Posts: 9222
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2016 Versys 1000 Titanium Devil, 2014 DL1000, 1999 VFR 800 Bumble Bee
Location: Millgrove, Ontario, CA
x 2876
x 10695

Re: Side stand movement

Post by raYzerman »

My '14 with roughly 35k miles has that same 1/2"... when deployed, the spring forces it outboard, thus always in the right place. I can't exactly remember what my project bike's "assembly" looked like, but I'll speculate, the "clevis" is a certain width to allow free movement and to prevent it dragging when you deploy it... it doesn't take much clearance to have 1/2" play at the bottom... you could look perhaps at bushing (#2) and file some off to shorten it, which would allow the "clevis" part to squeeze together... not sure that's a good idea, I think that is a forging and perhaps not best to stress it by squeezing it (even though it isn't much). Bottom line, normal, worry less ride more. I don't know that anyone has ever had a problem with one if left in it's "OEM state". A squirt of lube won't hurt it, perhaps with something that doesn't attract dirt and crud very much.
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
User avatar
bill lumberg
Contributor
Veteran
Posts: 2590
Joined: Tue Jun 30, 2015 1:03 pm
FJRModel: 2018ES/2022ES
x 3982
x 4369
Contact:

Re: Side stand movement

Post by bill lumberg »

My 14 and18 both had the same play. I know this because I’m lazy and usually irrigate and lube the sidestand using that “play”.
EWTBAGUITTDGS

2022ES
User avatar
Spininprop
Veteran
Posts: 494
Joined: Tue Feb 13, 2018 9:05 pm
FJRModel: 2022ES
Traded 2016A
Sold 2013 GSX-R1000
Sold 2003 GSX-R1000
Sold 2000 Bandit 600
Location: South Central, PA
x 689
x 548

Re: Side stand movement

Post by Spininprop »

Well ok. I thought it a bit odd but appears it's normal. Thanks all! I really hadnt noticed in the two years of ownership.
IBA# 84110
2022 FJR1300ES
2016 FJR1300A Traded
2013 GSX-R1000 Traded
2003 GSX-R1000 Sold
2000 Bandit 600 Traded
User avatar
John d
Veteran
Posts: 627
Joined: Sat Jan 19, 2013 1:01 pm
FJRModel: 2008A
Location: Normandale ON
x 869
x 568

Re: Side stand movement

Post by John d »

My '08 with 102000 miles has almost exactly 1/2" play as well.
User avatar
Spininprop
Veteran
Posts: 494
Joined: Tue Feb 13, 2018 9:05 pm
FJRModel: 2022ES
Traded 2016A
Sold 2013 GSX-R1000
Sold 2003 GSX-R1000
Sold 2000 Bandit 600
Location: South Central, PA
x 689
x 548

Re: Side stand movement

Post by Spininprop »

Thanks john d!
IBA# 84110
2022 FJR1300ES
2016 FJR1300A Traded
2013 GSX-R1000 Traded
2003 GSX-R1000 Sold
2000 Bandit 600 Traded
User avatar
Spininprop
Veteran
Posts: 494
Joined: Tue Feb 13, 2018 9:05 pm
FJRModel: 2022ES
Traded 2016A
Sold 2013 GSX-R1000
Sold 2003 GSX-R1000
Sold 2000 Bandit 600
Location: South Central, PA
x 689
x 548

Re: Side stand movement

Post by Spininprop »

bill lumberg wrote: Thu Aug 15, 2019 10:12 am My 14 and18 both had the same play. I know this because I’m lazy and usually irrigate and lube the sidestand using that “play”.
Im lazy too as i used the slop for a lube gap.
bill lumberg loved this
IBA# 84110
2022 FJR1300ES
2016 FJR1300A Traded
2013 GSX-R1000 Traded
2003 GSX-R1000 Sold
2000 Bandit 600 Traded
Post Reply