Fitting bar risers

Tech section strictly for the FJR. Everything from oil changes & suspension setup's to removing sheep hair from hard to reach places on the bike so that your wife never finds out.
Forum rules
Post Reply
CollingsBob
Contributor
Veteran
Posts: 2113
Joined: Thu Mar 08, 2018 2:19 pm
FJRModel: 2024 BMW R1300 GS
Location: Winnipeg
x 5154
x 2262

Fitting bar risers

Post by CollingsBob »

I’m putting on a pair of MCL bar risers...in order to fit them there is a plate under the top triple tree that holds a stationary nut and a bolt..attached to this plate is a thick wire for hose & cable management..This all, apparently, needs to be removed in order for the longer bolts to be used. Does the cable management simply get “unthreaded » from around the hoses & cables, or does it need to be cut off..
Top
User avatar
FJRoss
Veteran
Posts: 2435
Joined: Sat Apr 14, 2018 7:41 pm
FJRModel: 2011 FJR 1300
2017 BMW F700GS
Location: Fredericton NB (Canada)
x 703
x 2132

Re: Fitting bar risers

Post by FJRoss »

At least in earlier gens, it has to be cut.
Top
CollingsBob
Contributor
Veteran
Posts: 2113
Joined: Thu Mar 08, 2018 2:19 pm
FJRModel: 2024 BMW R1300 GS
Location: Winnipeg
x 5154
x 2262

Re: Fitting bar risers

Post by CollingsBob »

Got it figured out...I googled the instructions for BlackPath risers..Thanks
Top
Post Reply

Return to “FJR Tech”